58 380 mm 1000 mm 860 mm 1450 mm 1170 mm/1380 mm 1780 mm/1990 mm 1750 mm 1040 mm 1350 mm 660 mm 660 mm 860 mm 860 mm 1 2 3 4 1 2 3 4 Add-on units Perforated profile sections The perforated profile sections are always fitted via two securing points and provide a sturdy base. The lengths of the perforated profile sections can be selected as follows according to needs: 1000 mm long = low add-on unit, e.g. for perforated panels (see p. 69) 1450 mm long = medium-high add-on unit, various trays without add-on unit for lighting fixture or carton divider shelf 1780 mm long = high add-on unit with carton divider shelf or cantilever arm for lighting fixture 1990 mm long = high add-on unit with carton divider shelf or cantilever arm for lighting fixture The vertical perforated profile sections form the base for the add-on units to the tables. Dividing into two sub-areas helps when accommodating the tools and auxiliary equipment on the workstation, which are becoming increasingly larger. Example:The monitor and keyboard on the left are somewhat higher, with the label printer on the right easily reachable a little bit lower. See p. 15. Adjustment steps for plugged-in and screwed components. Add-on units Table width 2000 mm Table width 1600 mm Table width 1250 mm Grid widths for an overall table width of 2000 mm 2 x 860 or 1 x 1750 mm Grid widths for an overall table width of 1600 mm 2 x 660 or 1 x 1350 mm Grid widths for an overall table width of 1250 mm 1 x 660, 1 x 860 or 1 x 1040 mm
RkJQdWJsaXNoZXIy MjY2NDg=