MIN 20% MIN 10% D H D 2 13 For electric cables a clearance of at least 10% between the placement of the cable and it’s diameter has to be guaranteed; for hydraulic hoses the clearance should be at least 20%. Avoid placing cables/hoses that have different sheath finishes so that friction can be eliminated. (e.g. hydraulic cables and hoses). In the application of several cables/hoses it is preferable to avoid them rubbing each other by placing them singularly in the appropriate space and separating them from each other by the separators. If this is not possible, verify that the internal space does not allow the rubbing of the cables/hoses. (H< D). Place cables/hoses in a symmetrical way according to their dimensions and weight placing the largest and heaviest externally and the smaller and lighter internally. For further information on how to install cables/hoses see page 254. To guarantee that cable chain functions properly and to avoid any damage to the cables/hoses within, certain criteria concerning the placement must be followed: Placement of Cables/Hoses in the Cable Chains A 30 chain in steel with three bands and separations between electric cables and hydraulic hoses..
RkJQdWJsaXNoZXIy MjY2NDg=